## Mesh Topology | What Is Mesh Topology?

A mesh topology is a complex and extensive framework of point-to-point links that connects the nodes. There are two types of mesh networks: complete mesh and partial mesh. Partial mesh topologies are generally interconnected, with a few nodes having only two or three connections, whereas full mesh topologies are completely interconnected. Mesh topologies have a …

## Tree Topology | Tree topology diagram

What Is Tree Topology : The tree topology structure takes its name from the fact that the central node acts as a network’s trunk, with nodes branching outward in a branch-like pattern. Whereas each node in a star topology is directly connected to the central hub, the nodes in a tree topology are connected in …

## Network Topology

Network Topology:- The configuration, or topology, of a network is key to determining its performance. Network topology is the way a network is arranged, including the physical or logical description of how links and nodes are set up to relate to each other. There are numerous ways a network can be arranged, all with different …

## Ring Topology | What Is Ring Topology?

Ring Network Topology: With the exception of connected ends, ring network topology is similar to bus topology. This type of topology is usually divided into two types: unidirectional and bidirectional. A unidirectional ring network allows packets to go only in one way, but a bidirectional ring network allows data to move in any direction. Every …

## Bus Topology | What Is Bus Topology?

Bus Topology | What Is Bus Topology? A In a LAN (Local Area Network), a bus topology is used when multiple nodes are connected to a single cable rather than a single backbone. Different devices are connected via a coaxial cable/RJ-45 connection. In a bus topology, if one of the cables fails, the entire network …

## What Is Star Network Topology ?

Star Topology | What is Star Topology: The star network topology is characterized as a networking topology in which components are connected to a central part, which is commonly referred to as the HUB, via independent cables. Because there are no directions between the devices, this architecture will not generate traffic congestion. In this case, …

## Point to point network topology

Point to Point Network Topology: In a point-to-point architecture, two nodes (for example, PCs) in a network communicate directly to each other via a LAN cable or other data transmission medium. This is the most straightforward and cost-effective method of establishing a computer network. Because the underlying network is only used by two parties, the …

## Venturimeter | Advantage of Venturimeter

Venturimeter is a type of flowmeter which works on the principle of Bernoulli equation. This instrument is widely used in the water, chemical, pharmaceutical, oil and gas industries to measure the flow rate of a fluid inside a pipe. The pipe cross-sectional area is reduced to create a pressure difference which is measured with a …

## Strain Gauge Rosette

Structure and overview – A strain gauge rosette is a term for an arrangement of two or more strain gauges that are closely positioned to measure strains along different directions of the component under evaluation. Single strain gauges can effectively measure stress in only one direction, so the use of multiple strain gauges enables more …

## Foil strain gauge

Introduction- Foil strain gauge is an extension of resistance wire strain gauge. Here this gauge also uses a resistance material foil deposited over an insulating material such as Bakelite rather than winding a wire. The metals and alloys used for foil  are similar to wire material used in wire wounded strain gauge. Why to use …