Welcome to
TheInstrumentGuru.com
Thanks for choosing self assessment Quiz.
Check Your Ability in given 10 Questions.
Result will show after submission of quiz.
DATE:-July 15, 2026
NAME
1.
An actuator of a control valve is normally designed for
2.
For active region operation of npn transistor
3.
Type of proximity probe used in radial vibration monitoring
4.
The vena-contracta point of a flow element is
5.
Flapper nozzle is used in a/an _____ controller
6.
Bently 3300XL 1 meter probe has resistance of
7.
An acceptable voltage range of a logic 1 for TTL.
8.
The magnetic pickup produces a _____ output when a magnetic material moves through the magnetic field at the end of the pickup
9.
At what value is the Gap Voltage typically set while installing Radial Vibration Probes?
10.
The most commonly used orifice for flow measurement is
