Welcome to
TheInstrumentGuru.com
Thanks for choosing self assessment Quiz.
Check Your Ability in given 10 Questions.
Result will show after submission of quiz.
DATE:-March 17, 2025
1.
An ammeter's ideal resistance should be
2.
Lead/lag compensation, sometimes called “dynamic compensation,” is commonly used to:
3.
A Zener diode is always connected as
4.
A pressure transducer may produce a change of
5.
Bimetal strips are not used in
6.
The percent change in error that will cause 100% change in controller output is
7.
Which of the following is not a temperature measuring device?
8.
The pulsed UV fluorescence principle has the advantage of
9.
A reverse biased pn junction has resistance of the order of
10.
Beta ratio of orifice plate shall be between
