Pneumatic actuator | Pneumatic actuator valve
“Pneumatic actuator is a device which converts the energy of compressed air or gas into a mechanical motion. Here motion delivered can be rotary or linear, depending on the type …
Control Valve
Types of actuators
An actuator is a device that delivers a force or motion by converting source energy according to the control signal received. Here source energy can be pneumatic, hydraulic, or electric …
Actuator in Hindi | एक्चुएटर
“Actuator (एक्चुएटर) एक ऐसा उपकरण है जो प्राप्त control Signal के अनुसार Source Energy को परिवर्तित करके एक force या Motion प्रदान करता है। यहां Source Energy Pneumatic, Hydraulic या …
Valve Position Transmitter
Valve Position Transmitter is defined as one of control valve accessory which is used to monitor continuous valve position and transmit to controller such as DCS or PLC. The actual …
Quick Exhaust Valve
Quick exhaust valve provides rapid exhaust of control air when placed between control valve and actuator. These quick exhausts are required when fast valve closing/ opening is required based on …
Air Lock Valve
Air Lock valve (SMC) is used to hold the operating air inside actuator chamber to not make any disturbance in valve opening when any Pneumatic air supply or source failure …
Booster Relays | Volume booster
Booster relays (From SMC), sometimes called as volume boosters are pneumatic devices designed to reproduce a pneumatic pressure signal (1:1 ratio), but with far greater output flow capacity. Volume boosters are …
Smart Positioners
Smart Positioners are digital valve controllers based on microprocessor with internal logic capabilities and advance diagnostics features. These smart positioners have capabilities of automatic configuration & calibration. These valve positioners …
Valve Positioner
Valve Positioner (From Emerson) is the most common type control valve accessories used in wide industrial application. A positioner is a motion-control device which is designed to actively compare valve …
I to H Converter
I to H converter (from Voith) , also called as “current to hydraulic pressure” converter or I/H Transducer or Electro-Hydraulic converter, converts an electronic signal (analog output), typically from a …